Frequently Asked Questions

This depends on the substrate, location, and finish you're looking for. Lime render is ideal for older, breathable solid wall properties, while monocouche or thin coat systems may suit modern builds. Contact us for tailored advice.

Algae and staining are common, especially in shaded or damp areas. We recommend using our algae and mould remover followed by a protective coating to reduce future growth.

In some cases, yes — but only if the existing surface is stable and properly prepped. A bonding agent like SBR and a suitable basecoat may be required. Always seek advice before starting.

With the right preparation and maintenance, modern render systems can last 20+ years. Proper basecoats, mesh reinforcement, and primer layers all help extend lifespan.

Monocouche is a single-coat, through-coloured render with a scraped finish. Thin coat renders are applied over a basecoat and come in a wide range of textures and colours.

Mesh helps prevent cracking, especially over larger surfaces, junctions, or different substrates. We recommend using alkali-resistant mesh with most basecoat applications.

Start with the right substrate prep, use mesh where needed, and don’t skip expansion joints — a movement bead can help absorb stress and prevent hairline cracks.

Render should be applied in dry conditions between 5°C and 25°C. Avoid application during rain, frost, or strong direct sunlight to ensure proper curing.

Yes, but it’s important to use breathable, compatible paints — especially with lime or monocouche systems. See our range of render paints for ideal options.

Gently clean your render periodically with low-pressure water and use approved treatments like our surface cleaner to manage algae or dirt build-up.